| #BA1 : BASE PACKET 1 |
This packet consist of 7 boards. That are 5 boards (ALU, MC, SD, PC and IFR)* which are required to build up the CPU. More than you will get the base board of the memory unit and the base board of the Multi-I/O-Interface.
With building up this seven boards and with the content (parts) from the packet #BA1+ you can realize a minimal system. You get access to the system by using a terminal session.
(* Please look at the glossary in the bottom)
|
| #BA1+ : PARTS FOR BASE PACKET 1 |
This packet consist of all parts which are required to populate the seven boards from packet #BA1. In front of all there are the ICs, the bus connectors, the capacitors and resitors.
|
| #BO1 : OPTION PACKET 1 |
This packet is the extension to the memory unit (up to 1024 KB) with one additional board which will be plugged onto the base card from the memory unit.
You don't require an additional bus connector (BC)* because the board will be connected with board connectors.
(* Please look at the glossary in the bottom)
|
| #BO1+ : PARTS FOR OPTION PACKET 1 |
This packet consist of all parts which are required to populate the memory extension board. In front of all there are the ICs, the board connectors, the capacitors and resistors.
|
| #BO2 : OPTION PACKET 2 |
This packet is the extension of the Multi-I/O unit with two additional boards (parallel interface {LPT} , connector for PC keyboard, connector for LCD display and 8-Bit I/O interface for your own applications.
You don't require an additional bus connector (BC) because the boards will be connected with board connectors.
|
| #BO2+ : PARTS FOR OPTION PACKET 2 |
This packet consist of all parts which are required to populate the Multi-I/O extension boards. In front of all there are the ICs, the board connectors, the capacitors and resistors.
|
| #BA2 : BASE PACKET 2 |
This packet consist of 10 boards. That are the 5 boards (ALU, MC, SD, PC and IFR) which are required to built up the CPU. Furthermore you will get the 2 boards for the memory unit (including the extension) and 3 boards for the Multi-I/O unit (including the extension).
|
| #BA2+ : PARTS FOR BASE PACKET 2 |
This packet consist of all parts which are required to populate all ten boards. In front of all there are the ICs, the board connectors, the capacitors and resistors.
|
| #OP1 : OPTION PACKET 1 |
Option Packet 1 is the interrupt controller which consist of one board. For normal use this board is not required but it alows much more raising up the velocity of the system. If you wish to use a PC keyboard, the interrupt controller is required.
This board requires one more bus connector (BC).
|
| #OP1+ : PARTS FOR OPTION PACKET 1 |
This packet consist of all parts which are required to populate the Interrupt controller from #OP1. In front of all there are the ICs, the board connectors, the capacitors and resistors.
|
| #OP2 : OPTION PACKET 2 |
Option Packet 2 is the IDE interface controller which consist of one board. For normal use this board is not required but it alows the connection of CF cards (flash memory cards) or IDE harddisks.
This board requires one more bus connector (BC).
|
| #OP2+ : PARTS FOR OPTION PACKET 2 |
This packet consist of all parts which are required to populate the IDE interface controller from #OP2. In front of all there are the ICs, the board connectors, the capacitors and resistors.
|
| OTHER ORDER NUMBERS |
More descriptions you will find in the order list which should be clear. But if have questions or suggestions please get in touch with us. We are looking forward to your requests - Thanks!
|
